Step 1: Get Your Cleaning Materials and Chemicals
Unusually, the very first item you require is an easy one; A container. A five-gallon bucket would work perfectly. If you do not have one you can get one from your local hardware shop or retail giant. Then you require some bleach. This can be in the form of a liquid or a powder cleaner. (There is also options such as Easy Green's House and Siding Cleaner available in the house enhancement stores.) Lastly, you require a scrubby of sorts. A sponge with a rough side will work nicely. It may not be a good idea to use a steel wool pad as that can take the paint completely off your garage door. You can likewise use a semi-soft brush with a handle, which may be a little simpler. Also, make certain to wear a pair of gloves, either leather or latex.
Step 2: Prep Work
Once you have all your garage door cleaning materials, fill the (five gallon) bucket up midway and put those gloves on. Then pour in about half a cup of bleach. That might appear like a small amount but it is necessary not to overdo it with the bleach. Of course, if you are not comfy using bleach, there are a couple of alternatives. Dish soap will work, just not too. Multi-purpose cleaner (without bleach) likewise works, but once again, not also.
Step Three: All Set Set Clean!
Now you are all set to clean up that garage door! Make sure you get every panel and every fracture and crevice. It is normally better to do the top very first and work your way over from one side to the other. Then you can do the same thing for the bottom. Ensure to put some elbow grease into it and get any areas of mold or mildew off. When the garage door is entirely scrubbed down, you can wash it off with the hose pipe garage doors or simply by filling the bucket a couple of times. As always, if you have any questions or discover you require some garage door repair services, simply call a Los Angeles garage door repair expert!